Adding too much silicone oil and silica to the silica raw material leads to confusion in the performance of the product, the silicon atom in the silicone resin is destroyed, the softness appears sticking phenomenon, the softness liquidity does not work, and the pulling strength of the product after the high temperature forming is decreased , The product will not be reflected after the production is completed, but after a period of use, the product deformation, the rebound rate will drop gradually, and the product sticks.
Silicone product molding process in the debugging with the impact of the machine, and sometimes in the vulcanization process in order to increase production staff to increase production efficiency, the vulcanization time will reduce the mold products will appear soft phenomenon, increase production, time Under the premise of increasing the temperature to achieve the balance rate, otherwise the product will appear bad phenomenon, and the production of too long products appear too brittle stretch will tear phenomenon, the proposed production process appropriate control of the product time and curing temperature.
www.jinyumachine.en.alibaba.com
WhatsApp：+8613829130058
No comments:
Post a Comment