single head hydraulic silicone patch logo making machine
Check what we can do
silicone patch logo making machine Made of environmentally friendly silicone material.
Technical Parameters
silicone patch logo making machine
| Type | 30T | 50T | 63T |
| Worktable (mm) | 350*350 | 350*400 | 400*400 |
| Power specification | 3 phase 4 wire, 380V | 3 phase 4 wire, 380V | 3 phase 4 wire , 380v |
| Total power (kw) | 14.5 | 16.3 | 16.3 |
| Electrical power (kw) | 3.7 | 5.5 | 5.5 |
| Heating power (kw) | 10.8 | 10.8 | 10.8 |
| Piston diameter (mm) | Φ150 | Φ180 | Φ200 |
| Weight (kw) | 1000 | 1500 | 2000 |
| Size (mm) | 1200*1400*1350 | 1300*1650*1400 | 1400*1650*1700 |
1.nodular cast iron, has high tensile strengh and toughness after aging carbonization treatment;
2. use Japan NOKU oil seal, abrasion resistance, heat resistance and long service life;
3. use the HRC55-58 vertical post, middle carbon steel treatment hard-chromed treatment,
ensure the machine precision;
4. high and low pressure oil pump combination, cooling device for oil circuit system;
5. mator auto shutdown once it delay, make it better protect the oil system, poweer saving at
the same time;
6. operate the machine via PLC panel, use 24V circuit accessories, safe and durable.
Related Machines:
No comments:
Post a Comment