About silicone press machine

The silicone press machine is the main vulcanization equipment for silicone products. The process is divided into feeding, closing, exhausting, curing, stripping and mold cleaning. The main control process is pressure, die temperature and mold pressing time.

silicone press machine Safe operation method：

1. all molds must be placed in the plate silicone press machine worktable, and the gloves should be properly worn to prevent scalding.

2. when the specimen is stuck, open the mold and watch out for smashing hands to prevent landing.

3. Adjust the pressure gauge according to the size of the die and the specified unit pressure, and over pressure vulcanization is strictly prohibited.

4. It is strictly prohibited to backlog uneven plates in a flat plate.

5. When using the vulcanized plate to sample, the protective rubber plate must be attached.

6. If the equipment fails, the power must be cut off before being processed.

7. When taking the test piece from the mold, pay attention to the smooth surface of the mold cavity and die surface so as to prevent scratches.

8. It is strictly prohibited to take molds or clean up materials when the flat rises.

9. It is not allowed to use the flat vulcanizing machine for the use of the specified temperature.

10. When not in use, cut off the power supply, put down the pressure, and close the oil valve.